If you are supervising a construction project, installing large components such as steel bars will require mechanical help from a professional rigger. A crane is perfect to carry out the job of installing components that construction workers cannot do by themselves because of the proportion and difficulty of installation of each component. But how do you pick the right type of crane for the job? Here are some tips.
Cranes are of different types: hydraulic boom, all-terrain, rough terrain, crawler and boom trucks. Each of these cranes has its function and use.
Capacity
If you are looking for options for crane hire Lincoln companies offer, you must first consider the crane’s capacity. Capacity means the combined weight of the load that the crane will carry and the crane’s reach. The right size of crane should be able to bear the load without any difficulty, and if it needs to swing the load to its position, it should do so quickly.
Environment
The terrain of the access route is another critical consideration. You do not want a crane to sink into the ground because of poor terrain. Examine the topography of the construction site: is the ground solid or is it boggy and watery? An all-terrain or boom truck is the most suitable type of crane for the latter. It is to ensure that the crane’s support legs do not move when it carries and moves a load to its position. You must also know how much weight the terrain can handle for steady crane operation.
Height
It is a very arduous process to lift a load high up in the air. The right height of the crane is crucial. You may even have to secure a permit to use a crane where a load needs to be lifted high. When lifting hefty loads high up in the air, only a qualified and experienced crane operator should perform the job. This type of lifting requires careful and arduous planning, and the setup time for the crane takes a long time. The best kind of crane for this job is an all-terrain crane.
Access
One of the many mistakes that project engineers can make is not planning a sufficient access route for the crane. The route access area should have enough space for the crane’s movement before, during and after the job. Provided that the roof is not too low, an all-terrain crane or a boom truck is the most suitable type. The only disadvantage with both types is that they have limited capacity for lifting and reaching. One solution for this is to remove a part of the roof to install the load.
Each type of crane has its functions, advantages and benefits depending on the purpose. Choosing the wrong crane will cost you more and may delay the job. These tips will significantly help you in making the rigger’s job more efficient and faster and will help you save on overhead costs, as hiring a crane can be very costly.
Leave a Reply